1 Scope

This clause of Part 1 is applicable except as follows:

1.1 Addition:

Switches for an ambient temperature up to and including 55�C. Switches are not rated using thermal current, therefore Table 15 does not apply.

Addition of clauses:

1.101 This document is based on the Standard for Switches for Appliances - Part 1: General Requirements, UL 61058-1. The clauses outlined below are intended to address the specific minimum requirements for switches incorporated into or integrated with portable/transportable power tools, and gardening machinery in accordance with the Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements, UL 60745-1. If the switch complies with the Standard for Switches for Appliances - Part 1: General Requirements, UL 61058-1 and is suitable for use in tools under the scope of the Standard for Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements, UL 60745-1, the switch is considered in compliance with these requirements and additional testing is not required. Electronic switches shall be provided with at least one series contact in the load path.